Viking DFSB 483 Refrigerator Manual

The Viking DFSB 483 is a premium built-in refrigerator designed for luxury kitchens. It features a spacious interior with adjustable shelving, a powerful cooling system, and advanced temperature control. This manual provides essential information on safety, features, installation, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Water Supply 7. Operating the Refrigerator 8. Accessibility Features 9. Care & Cleaning 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Adjustable shelves, LED lighting, digital temperature control, stainless steel finish, and energy-efficient design.

Feature	Description
Adjustable Shelves	Customize storage space to fit various items
LED Lighting	Bright and energy-efficient interior lighting
Digital Temperature Control	Precise temperature settings for optimal food preservation
Stainless Steel Finish	Durable and easy to clean exterior
Energy Efficient	Designed to minimize energy consumption

Installation

Ensure proper installation for optimal performance. Follow the steps below:

Unpack and inspect the refrigerator for any damage.
Position the refrigerator in the desired location, ensuring adequate ventilation.
Connect the water supply line if using the ice maker feature.
Plug the refrigerator into a grounded electrical outlet.

WARNING! Ensure the refrigerator is level to avoid operational issues.

First-Time Setup

Power on the refrigerator and set the desired temperature using the digital control panel.

Set the refrigerator temperature to 37°F (3°C) and the freezer to 0°F (-18°C).
Allow the refrigerator to cool for several hours before adding food.
Check the water supply connection if using the ice maker.

CAUTION! Avoid overloading the refrigerator during the initial setup.

Specifications

Model: DFSB 483
Dimensions: 48 inches width, 24 inches depth, 84 inches height.
Capacity: 18.5 cu. ft. refrigerator, 6.5 cu. ft. freezer.
Power Supply: 115V, 60Hz.
Weight: 300 lbs.
Cooling System: Dual evaporator system for optimal temperature control.
Finish: Professional stainless steel.

Controls and Settings

Access the control panel to adjust temperature settings and monitor performance.

Features: Temperature display, ice maker control, and energy-saving mode.

Connecting Water Supply

Follow these steps to connect the water supply for the ice maker:

Locate the water supply valve and shut it off.
Connect the water line to the refrigerator's water inlet.
Turn on the water supply and check for leaks.

Tip: Use a water filter for better ice quality.

Operating the Refrigerator

To operate the refrigerator, follow these guidelines:

Adjust the temperature settings as needed.
Keep the refrigerator door closed as much as possible to maintain temperature.
Regularly check and clean the condenser coils.

WARNING! Do not block air vents inside the refrigerator.

Accessibility Features

The Viking DFSB 483 includes features to enhance accessibility, including easy-to-reach controls and adjustable shelving.

Care & Cleaning

Unplug the refrigerator before cleaning. Use a soft cloth and mild detergent.

CAUTION! Avoid using abrasive cleaners that may scratch the surface.

Regulatory Information

This refrigerator complies with all applicable safety standards and regulations. For support, visit www.vikingrange.com or contact customer service.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Refrigerator not cooling	Power supply issue	Check power connection and circuit breaker.
Ice maker not working	Water supply issue	Ensure water line is connected and valve is open.
Noise from refrigerator	Compressor operation	Normal operation; check for loose items.
Frost buildup	Door seal issue	Inspect and replace door seals if damaged.

Reset: Refer to the control panel for reset options if available.

Service: For service inquiries, contact customer support at 1-800-123-4567 or visit www.vikingrange.com.